With registration, RTOs must juggle many responsibilities like annual declarations, AVETMISS reporting, and marketing compliance, where validation often causes the most anxiety.
Although we have published several articles on validation, let’s revisit the term. ASQA describes validation as a quality review of the assessment process.
In essence, validation confirms which parts of an RTO's assessment process are correct and pinpoints elements for improvement. With a solid grasp of its key components, validation becomes manageable.
As per Clause 1.8 of the SRTOs 2015, RTOs are required to ensure that their assessment systems, including RPL, meet training package requirements and are conducted following the Principles of Assessment and Rules of Evidence.
We must adhere to the standards by conducting two types of validation.
The first kind of assessment validation ensures your RTO's assessment adheres to the training package requirements within your scope.
The subsequent validation type ensures assessments are in line with the principles of assessment and rules of evidence.
Thus, validation is performed both prior to and following the assessment. The first type, assessment tool validation, is the focus here.
Understanding the Two Types of Assessment Validation
An Introduction to Assessment Validation
As noted earlier and in our earlier blog entries, validation is split into two stages: (1) assessment tool validation and (2) post-assessment validation.
Assessment tool validation, also known as pre-assessment validation or verification, pertains to the first part of the clause, focusing on ensuring all unit requirements are met and that all workbooks are fully compliant.
In post-assessment validation, the emphasis is on implementation, ensuring that Registered Training Organisations conduct assessments as per the Principles of Assessment and Rules of Evidence.
Our focus here will be on assessment tool validation.
Guidelines for Conducting Assessment Tool Validation
With a clear understanding of the two types of validation, let’s focus on assessment tool validation.
Appropriate Times for Assessment Tool Validation
Assessment tool validation aims to verify that all elements, performance criteria, and performance and knowledge evidence are covered by your assessment tools.
Thus, whenever new learning resources are purchased, you must conduct assessment tool validation before allowing student use.
There's no need to wait for your next 5-year cycle validation schedule. Validate new resources immediately to ensure they are suitable for student use.
Still, this isn't the sole reason for conducting this type of validation. Conduct assessment tool validation when you:
- resources are updated
- adding new training products on scope
- review your course against training product updates
- learning resources are identified as a risk during your risk assessment
The Australian Skills Quality Authority employs a risk-based approach for regulating RTOs and expects regular risk assessments. Therefore, student complaints about learning resources are an ideal time to conduct assessment tool validation.
What Training Products Need Validation?
Keep in mind, this validation ensures that all learning resources comply before use. All RTOs must validate resources for each unit.
Starting Assessment Tool Validation: What You Need
Educational Materials
Since you are validating your assessment tools, you will require the entire suite of your learning resources:
Mapping tool – the primary document to check. It reveals which assessment items align with unit requirements, expediting validation.
Learner/student workbook – ensure it's appropriate as an assessment tool. Check if the instructions are clear and answer fields are adequate. This is a frequent issue.
Assessor guide/marking guide – also verify if instructions for assessors are sufficient and if clear benchmarks for each assessment item are provided. Clear benchmarks are crucial for reliable assessment outcomes.
Other related resources – may include checklists, registers, and templates developed separately from the workbook and marking guide. Validate these to ensure they suit the assessment task and address unit requirements.
Validation Group
Clause 1.11 outlines the criteria for validation panel members, specifying that validation can be done by one or more people. RTOs typically require all trainers and assessors to participate, occasionally inviting industry experts.
Collectively, your validation panel should have:
Vocational competencies and current industry skills that relate to the unit being validated
Recent knowledge and skills in vocational teaching and learning
Either of the following training and assessment credentials:
TAE40116 Certificate IV in Training and Assessment or its future version
Assessment validation form/template
Having a validation tool helps you with both the validation process and documentation. Using a validation tool makes it easier to look at how each assessment item maps against each unit requirement.
Using a validation tool helps in both the validation process and documentation. It facilitates seeing how each assessment item matches each unit requirement.
At the same time, it can serve as your document evidence that you have validated your resources before letting the students use them.
It can also serve as proof that you have validated your resources before allowing students to use them.
ASQA does not provide a recommended or required template for assessment tool validation, but many templates are available online. These tools generally have validators review the tools as a whole to determine if they meet the principles of assessment.
Principles of Assessment Form Yes/No/Partially Comments
1. Fair
2. Flexible
3. Valid
4. Reliable
Although such templates ease validation, they can cause judgment errors since there’s minimal space for comments on each assessment item.
It is highly advisable to use a more detailed template for evaluating each unit requirement and its corresponding assessment items. Below is an example:
Element Performance Criteria Assessment Guidelines Standards Assessment Instrument Rectification Recommendations
What do you Need to Check?
What Should Be Inspected?
As discussed in our blog post Common Problems In Assessment Tools, it’s essential that your assessment tools enable trainers to follow assessment principles and evidence rules.
Basic Principles of Assessment
Fairness – Does the assessment process ensure equal opportunity and access for everyone?
Flexibility – Are multiple options available in the assessment to demonstrate competence based on different needs and preferences?
Validity – Is the assessment measuring what it is supposed to measure? Is it a valid tool for assessing the required skill or knowledge?
Reliability – Will the assessment yield the same results every time, no matter who conducts the training? Will different assessors make the same decision on skill competence?
Core Rules of Evidence
Validity – Does the evidence prove that the candidate possesses the skills, knowledge, and attributes described in the unit of competency and associated assessment requirements?
Sufficiency – Is there enough evidence to ensure that the learner has the skills and knowledge required?
Sufficiency – Is the evidence enough to confirm the learner has the required skills and knowledge?
Authenticity – Is the assessment tool ensuring that the work is the candidate’s own?
Currency – Are the assessment tools in line with current units of competency and contemporary industry practices?
Although these are regularly covered in VET professional development and nationally recognised training, numerous tools still struggle to meet these requirements.
To prevent using learning resources that overlook some unit requirements, make sure to follow these guidelines:
Act on Your Words
Take note of the verbs used in the unit requirements and make sure they are addressed by the assessment item. For example, in the unit CHCECE032 Nurture babies and toddlers, one performance evidence requirement asks students to:
Carry out each of the following activities at least once with two different babies under 12 months old in a safe environment, using age-appropriate verbal and non-verbal communication in accordance with service and regulatory requirements:
change diapers
prepare bottle, bottle feed babies and clean equipment
solid food prep and feeding infants
respond to baby signs and cues suitably
prepare and settle babies for sleep
monitor and promote physical exploration and gross motor skills suitable for the age
Having students describe the nappy-changing process for babies under 12 months doesn’t fulfill the unit requirement. Unless the requirement assesses underpinning knowledge (i.e., knowledge evidence), students should be doing the tasks.
Heed the Plurals!
Pay attention to the numbers. In our example on one of the unit requirements of CHCECE032, this single unit requirement calls for the students to complete the tasks at least once on two different babies under 12 months of age. Having students complete the tasks listed twice on just 1 baby won’t cut it.
Pay attention to the numbers. In our CHCECE032 example, one unit requirement requires students to complete the tasks at least once with two different babies under 12 months old. Doing the tasks twice with one baby isn’t sufficient.
Complete or Not Competent
Mind the lists. In the previous example, if students perform just half the tasks listed, it’s non-compliant. Each assessment item must address all requirements, or the student is not yet competent and the assessment tool is non-compliant.
Can you be more specific?
Can You Clarify Further?
Each assessment item must include clear and specific benchmark answers to guide the assessor’s judgment on the student’s competence. Hence, ensure your instructions are clear and not confusing for students or assessors. For instance:
What kind of information can be included in a work package?
What types of information can be included in a work package?
Answers can include:
Essential resources
Relevant expenses
Activity duration
Designated duties and responsibilities
When an assessment item requires multiple answers, specify how many answers a student must provide. This way, your assessment remains reliable, and the evidence collected is valid.
This is also true for assessment items with double-barrelled questions or those that require multiple answers at once. These can confuse students and assessors, as demonstrated in the sample question below:
Identify a hazard and/or environmental issue in the workplace and select the most effective hazard control hierarchy.
Answers can include, but are not limited to:
Weather conditions – isolation of work area, engineering controls, personal protective equipment
Work area and ground conditions – eliminating hazards, isolating, engineering
People – isolation, engineering controls, administrative controls
Structural hazards – substitution, isolation, use of engineering controls
Chemical hazards – isolating, use of engineering controls, administration
Equipment or machinery – isolation, engineering, administrative controls
Steering clear of double-barrelled questions simplifies responses for students and find it here enables assessors to accurately judge competence.
Seeing these requirements, you might think, “Don’t learning resource developers offer audit guarantees?” But such guarantees mean you must wait for an audit before rectifying noncompliance. This affects your compliance history, so it’s wiser to take the safe and compliant route.